Plumbing Manchester - Y.I.D 3 Plumbing Our Blog, Latest News and Tips for all things Plumbing


How to Increase Pressure of Boiler?

29 September 2014 | Category: Boiler Problems | Author: Administrator

Following on from the previous blog post: we follow up with today's post on simple instructions on how to check if you can increase the pressure of your boiler.

First thing to do is to check in your user manual to see if you can indeed re-pressurise the boiler yourself. Usually you can also find instructions on the rear of the control panel.

Depending on your boiler and the setup of your boiler there are essentially two ways you can increase pressure of your boiler. The first is the external filling hose and the second is the internal filling key.

If your boiler is setup in which there is an external filling hose attached below your boiler base to pipes then you firstly need to locate two taps which will be at either ends of the hose. Turn the first tap and then after that slowly turn the second tap. You will hear the water run at this point and fix your eyes to the pressure gauge on your Boiler panel. You will at this point see the pressure increase. Once it has gone passed the red zone on the gauge (around the 1 bar mark) then close the second tap. Proceed to then close the first tap.

You will now have re-pressurised your system boiler.

 

Stay tuned for the next blog post on the internal filling key method.

If your boiler panel needs tools to remove it then don't touch it. Book one of our engineers for all Plumbing Manchester contact us.


Boiler System Pressure

29 September 2014 | Category: Boiler Problems | Author: Administrator

We are here with another helpful self troubleshooting common issues with your Boiler.

Most boilers have a pressure gauge showing system water pressure. Please chek the guage and make sure the pressure is not too low. The pressure usually needs to be at around 1 bar. Anything lower means that your water pressure is too low and so your radiators are not getting warm and/or the hot water is not working.

Plumbing Manchester - Y.I.D 3 Plumbing bringing you useful troubleshooting tips for all your plumbing problems and issues.


Central Heating troubleshooting

28 September 2014 | Category: Boiler Problems | Author: Administrator

Is your central heating or hot water not working?
Believe it or not this quick fix tip can save you a lot of worry and best of all it is not very techincal. In fact it is easy as switching a button off and then back on again rather like a light switch.
 

The switch on your boiler which is the electrical supply to your boiler is commonly on the front panel of most boilers. Switch this off and after a few minutes switch it back on. What this essentially does is reset your boiler and might resolve your problem.

Funnily enough this does work for most people who initially think that the boiler has a bigger issue.

If it does not work for you you can contact us by phone on 0161 312 0158 or email us at info@yid3plumbing.co.uk.

For all Plumbing Manchester choose Y.I.D 3 Plumbing.